Beginner Tutorials

Phase 3 of 6·Beginner tutorials

1. 1Data path
2. 2Install
3. 3Beginner tutorials
4. 4Advanced tutorials
5. 5Prototype
6. 6Production

Four short tutorials that take LEO100 from components on the bench to a working receiver producing a position fix. This is a fixed, linear sequence. Follow all four in order.

These pages assume the Locus Lock GUI is installed. CLI workflows will be included in the Advanced Tutorials.

1

Check Installation

Verify PpRx is installed and the RadioLion enumerates on your host.

2

Record RF Data

Capture a reproducible .bin file from the RadioLion you can replay for the rest of the journey.

3

Configure PpRx in the GUI

Generate a working .opt and .config pair with the Configuration Generator.

4

Process Data

Run PpRx on your .bin and on a live RadioLion stream. See a position fix on the map.

You're done with Phase 3 when: PpRx reports a position fix on both your post-processed .bin and a live RadioLion stream. From there, continue to Phase 4 (Advanced Tutorials).